How To Choose Cleaning Solutio

How Choose Cleaning solution

Different Types Of Ultrasonic Cleaning Solutions
mild alkaline, mild acid and solvent replacement. Which ultrasonic cleaning solution an ultrasonic cleaning process requires depends on
what type of grime or deposit is being removed.

A mild alkaline ultrasonic cleaning solution is suited for the cleaning of oily parts. This agent works by breaking down the ionic bond that
has formed between an oil and a metal. As the part is cleaned, the oil is dissolved and is dispersed into the liquid.

A mild acid ultrasonic cleaning solution is suited for removing rust and oxidation. An oxide remover, the mild acid solution is suited for
applications where oxidation has coated the surface of the part.

A solvent replacement ultrasonic cleaning solution, or “shellac-buster”, removes rust, oxidation, carbons and oils. Shellac-
busters are suitable for applications where a solvent like kerosene may have once been used. Solvent replacement agents are
 faster working than alkaline agents, and they perform in a similar fashion by breaking down ionic bonds and removing 
oxidation and are non-hazardous.

What cleaning solution shouldn’t I use?

You should never use flammable liquids in an ultrasonic cleaning system. Because of the heat generated by the cavitation process,
dangerous conditions will occur if flammable liquids are used for ultrasonic cleaning.

Use only those ultrasonic cleaning solutions recommended by the manufacturer of the ultrasonic cleaning system

Can ultrasonic cleaning damage my parts?
With certain cautions, ultrasonic cleaning is considered safe for most parts. While the effects of thousands of implosions per second is
very powerful, the cleaning process is safe since the energy is localized at the microscopic level. The most important cautionary
consideration is the choice of cleaning solution. Potentially adverse effects of the detergent on the material being cleaned will be
enhanced by the ultrasonics

When should solutions be change?

Cleaning solutions should be replenished when a noticeable decrease in cleaning action occurs, or when the solution is visibly dirty
or spent. A fresh batch of solution at each cleaning session is usually not required.


© 2012 Derui International Limited. All rights reserved

© 2017-2018  Shenzhen Derui Ultrasonic Equipment Co. Ltd

JOB     SINA